Order Products : sales@su-jiao.com
Shandong Aobang TPU-Polyester 75-A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Shandong Aobang Chemical Technology Co.,Ltd. |
| Trademark: | Shandong Aobang TPU-Polyester |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Lg4Ufr_Shandong-Aobang-TPU-Polyester-75-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shandong Aobang TPU-Polyester 75-A is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. |
| General Information | |
|---|---|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 to 77 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | 40.0 | mm³ | DIN 53516 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature | 170 to 190 | °C |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | > 3.00 | MPa | |
| 300% Strain | > 10.0 | MPa | |
| Tensile Strength (Break) | > 30.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 600 | % | ASTM D412 |
| Tear Strength | > 70.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -42.0 | °C | DSC |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ Fluoroplastic ET 6235Z | 3M Advanced Materials Division | ETFE | 3M™ Dyneon™ Fluoroplastic |
| Adell Polyamide AS-70 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| EPO-TEK® H20E-HC | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Kemcor LD 4200 Film | Qenos Pty Ltd | LDPE | Kemcor |
| LNP™ THERMOCOMP™ Noryl_HM3020 compound | SABIC Innovative Plastics Europe | PPE+PS | LNP™ THERMOCOMP™ |
