Order Products : sales@su-jiao.com
Pebax® 2533 SD 02
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | msCI7I_Pebax-2533-SD-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide PEBAX® 2533 SD 02 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SD grade is heat and UV stabilized and contains mould release additive. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 24 hr, 4.00 mm | 0.80 | % | |
| Flow : 24 hr, 4.00 mm | 0.50 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 77 | ||
| Shore A, 15 sec | 74 | ||
| Shore D | 27 | ||
| Shore D, 15 sec | 22 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 32.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 750 | % | ISO 527-2 |
| Flexural Modulus | 12.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break | ||
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 58.0 | °C | ISO 306 |
| Melting Temperature | 134 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 55.0 to 65.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Processing (Melt) Temp | 180 to 240 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Note Message | |
|---|---|
| 1 . | Mold at 40°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotec® ABS 1001 FR/E | ROMIRA GmbH | ABS | Rotec® ABS |
| SILVER® SA-3130 | Guangdong Silver Age Sci & Tech. Co., Ltd | TPE | SILVER® |
| TEKANATE™ G7013 | Mando Advanced Materials Co., Ltd. | PC | TEKANATE™ |
| Ecollent™ PC/PBT | Lucent Polymers, Inc. | PC+PBT | Ecollent™ |
| Durethan® BKV 30 G H2.0 900051 | LANXESS Corporation | Nylon 6 | Durethan® |
