Order Products : sales@su-jiao.com
InnoPlus HD3355F
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wTLZtD_InnoPlus-HD3355F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus HD3355F is produced by slurry process, a technology licensed by Mitsui. This grade has well balance property of optical property, mechanical property and processability. The special characteristic of this grade consists of low gel content, stiffness and packing property. This grade is suitable for high quality film, produced by co-extrusion process. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.951 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 23.5 | MPa | |
| Break | 36.3 | MPa | |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Apparent Bending Modulus | 735 | MPa | ASTM D747 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1 | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 2 |
| Melting Temperature | 131 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 to 190 | °C | |
| Cylinder Zone 2 Temp. | 170 to 190 | °C | |
| Cylinder Zone 3 Temp. | 170 to 190 | °C | |
| Cylinder Zone 4 Temp. | 170 to 190 | °C | |
| Cylinder Zone 5 Temp. | 170 to 190 | °C | |
| Die Temperature | 190 to 200 | °C |
| Note Message | |
|---|---|
| 1 . | Complete break |
| 2 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 8070 | Formosa Plastics Corporation | HDPE | TAISOX |
| TUFNYL® SGF 15 GA BLACK | SRF Ltd. | Nylon 6 | TUFNYL® |
| AMTOPP SP12 | Inteplast Group | PP, Unspecified | AMTOPP |
| Evoprene™ 084 | AlphaGary | SBS | Evoprene™ |
| HiFill FR® PA6/6 GF25 FR-N IM3 | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
