Order Products : sales@su-jiao.com
EMAC+® SP1501
| Category: | EMA , Ethylene Methyl Acrylate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | EMAC+® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PiOAp2_EMAC-SP1501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Westlake EMAC® Plus SP1501 is a 20% EMA copolymer designed for extrusion coating, compounding and blending where low viscosity, flexibility and strength are important. SP1501 provides excellent elasticity and low temperature performance. This resin is capable of very high filler loadings. A higher peak melting temperature than comparable EMA grades makes it a more viable choice for building products that are subjected to 180°F testing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.941 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Methyl Acrylate Content | 20.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 37 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 3.86 | MPa | |
| Break | 5.52 | MPa | |
| Tensile Elongation 2(Break) | 480 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -73.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 43.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 100 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsamid® AESN Noir P110 TL | Arkema | Nylon 12 | Rilsamid® |
| Cheng Yu N6G35 | Cheng Yu Plastic Company Limited | Nylon 6 | Cheng Yu |
| Fainplast PVC GK 89 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Generic LCP - Mineral | Generic | LCP | Generic |
| HiFill® POM CO 0241 S | Techmer Engineered Solutions | Acetal (POM) Copolymer | HiFill® |
