Order Products : sales@su-jiao.com

Ravago Compounds PP-6442

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Ravago Manufacturing Americas, LLC
Trademark:	Ravago Compounds
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zl6pXD_Ravago-Compounds-PP-6442.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Key Features:

Polypropylene Homopolymer

20% Talc filled

General Purpose

Designed for Injection molded applications

Good balance of processability and physical properties

General Information
Filler / Reinforcement	Talc filler, 20% filler by weight
Features	Homopolymer Workability, good General
Uses	General
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	22	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus - Tangent (23°C)	2600	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	27	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, not annealed	124	°C	ASTM D648
1.8 MPa, not annealed	68.3	°C	ASTM D648

Injection	Nominal Value	Unit
Drying Temperature	71.1 - 93.3	°C
Drying Time	0.0 - 8.0	hr
Rear Temperature	193 - 238	°C
Middle Temperature	193 - 238	°C
Front Temperature	193 - 238	°C
Nozzle Temperature	193 - 238	°C
Mold Temperature	26.7 - 60.0	°C
Back Pressure	0.00 - 0.689	MPa
Screw Speed	50 - 150	rpm

Injection instructions
Hot Runner Temperature (if applicable): 420 to 450°F

Resin Grade	Manufacturer	Category	Trademark
RTP 1381 C TFE 15	RTP Company	PPS	RTP
DynaStat® 2257X2	Polymer Dynamix	Nylon 12	DynaStat®
KRATON® G2874 GO-N	Kraton Polymers LLC	SEBS	KRATON®
Hyundai EP PA66 LD130	HYUNDAI EP Co., Ltd.	Nylon 66	Hyundai EP PA66
Paxon™ BA54-030	ExxonMobil Chemical	HDPE Copolymer	Paxon™