Order Products : sales@su-jiao.com
SCHULAMID® 6 GF 30 4DD BLACK
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | A. Schulman Europe |
| Trademark: | SCHULAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zepAyB_SCHULAMID6GF304DDBLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% glass fibre reinforced flame-retardant Polyamide 6 grade; halogen free; very good surface appearance |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.43 | -- | g/cm³ | ISO 1183/A |
| Viscosity Number | 145 | -- | cm³/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 12000 | 6500 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Break) | 140 | 95.0 | MPa | ISO 527-2/1A/5 |
| Tensile Strain (Break) | 3.0 | 6.0 | % | ISO 527-2/1A/5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 9.0 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 12 | 16 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 60 | -- | kJ/m² | ISO 179/1eU |
| 23°C | 70 | 70 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 215 | -- | °C | ISO 75-2/Bf |
| 1.8 MPa, not annealed | 204 | -- | °C | ISO 75-2/Af |
| Vicat Softening Temperature | ||||
| -- | 212 | -- | °C | ISO 306/A50 |
| -- | 203 | -- | °C | ISO 306/B50 |
| Ball Pressure Test (200°C) | Pass | -- | IEC 60695-10-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Comparative Tracking Index | 475 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate | ISO 3795 | |||
| 0.750mm, automatic fire extinguishing | 0.0 | -- | mm/min | ISO 3795 |
| 1.50mm, automatic fire extinguishing | 0.0 | -- | mm/min | ISO 3795 |
| 3.00mm, automatic fire extinguishing | 0.0 | -- | mm/min | ISO 3795 |
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 0.75 mm | V-0 | -- | IEC 60695-11-10, -20 | |
| 1.5 mm | V-0 | -- | IEC 60695-11-10, -20 | |
| 3.0 mm | V-0 | -- | IEC 60695-11-10, -20 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.75 mm | 960 | -- | °C | IEC 60695-2-12 |
| 1.5 mm | 960 | -- | °C | IEC 60695-2-12 |
| 3.0 mm | 960 | -- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 0.75 mm | 750 | -- | °C | IEC 60695-2-13 |
| 1.5 mm | 750 | -- | °C | IEC 60695-2-13 |
| 3.0 mm | 750 | -- | °C | IEC 60695-2-13 |
| Oxygen Index | 32 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.040 - 0.10 | % | |
| Suggested Max Regrind | 20 | % | |
| Hopper Temperature | 70 | °C | |
| Processing (Melt) Temp | 250 - 280 | °C | |
| Mold Temperature | 60 - 100 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rigidex® P 450-HP90 | INEOS Olefins & Polymers Europe | PP Impact Copolymer | Rigidex® P |
| Trexprene® A55NI | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| AMTOPP TT22 | Inteplast Group | PP, Unspecified | AMTOPP |
| Celanex® 3200-2FC | Celanese Corporation | PBT | Celanex® |
| JSR EPR EP35 | JSR Corporation | EPDM | JSR EPR |
