Order Products : sales@su-jiao.com
MTM® 70
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | MTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xdodxV_MTM-70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MTM70 is a toughened, variable cure temperature prepreg matrix formulated for the manufacture of structural components operating at elevated service temperatures. After a 135°C (275°F) standard cure cycle, MTM70 provides excellent mechanical performance for components operating at up to 140°C (284°F). After post—cure to 180°C (356°F), MTM70 will operate at higher temperatures without significant loss of toughness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.27 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 145 | °C | |
| -- 3 | 190 | °C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | DMA E' onset Tg, 90 minutes at 135°C (275°F) |
| 3 . | DMA E' onset Tg, 90 minutes at 135°C (275°F) + 2 hours at 180°C (356°F) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) LP 137 A | A. Schulman Europe | ABS | POLYMAN® |
| Accura® Bluestone™ | 3D Systems | Unspecified | Accura® |
| ALTECH® ABS A 1000/206 | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| DURANEX® 6300B | Polyplastics Co., Ltd. | PBT | DURANEX® |
| INSTRUC PESGF20 | Infinity LTL Engineered Compounds | PESU | INSTRUC |
