Order Products : sales@su-jiao.com
Plasmer 7080N/1002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Plasmer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zHrx1r_Plasmer-7080N-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wide service temperature range, resistance, compression set, recyclable |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 8.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/7.06 kg) | 46 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 81 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.73 | MPa | ASTM D412 |
| Tensile Strength (Break) | 8.83 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 630 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STERalloy™ FDG 2021-5 | Hapco Inc. | TP, Unspecified | STERalloy™ FDG |
| ALCOM® PC 740/4 GY1152-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| G-Blend 65 PC/ABS | Gardiner Compounds Ltd. | PC+ABS | G-Blend |
| OTECH TPO OTR4099-Molding | OTECH Corporation | TPE | OTECH TPO |
| RONFALIN® ABS 1361 | A. Schulman Europe | ABS | RONFALIN® |
