Order Products : sales@su-jiao.com
S&E Automotive XP23-566-1
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E Automotive |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5gmgGM_S-E-Automotive-XP23-566-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PVC weatherable, integral colored, filled, low gloss lift gate molding compound. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | < 1.30 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 32 to 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | > 15.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 200 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | > 45 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Flexibility | -30 | °C | GM 9503P |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Accelerated Weathering Duration 4 | < 3.00 | SAE J2527 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | Method B |
| 4 . | after 2000 kj/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trexlink™ 4770 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | Trexlink™ |
| Wondel® C CSA | Nanjing Julong Engineering Plastics Co., LTD | PC+ABS | Wondel® C |
| Nycast 6PA-MoS2 | Cast Nylons Ltd. | Nylon 6 | Nycast |
| AKROMID® A3 GK 30 natural (3689) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| KOPA® KN173HRV | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
