Order Products : sales@su-jiao.com
Sarlink® TPE EE-2365B BLK X
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ycit5I_Sarlink-TPE-EE-2365B-BLK-X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink EE-2365B is a UV stable low durometer grade with exceptional tensile strength, superior surface esthetics, good chemical resistance and good elasticity. It can be easily processed by extrusion,for a number of automotive applications such as glass run channels, waistbelts, weatherstrips, seals and other profiles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec, Injection Molded) | 64 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Transverse flow : 100% strain | 2.10 | MPa | ISO 37 |
| Flow : 100% strain | 2.60 | MPa | ISO 37 |
| Tensile Strength | ISO 37 | ||
| Transverse flow : Fracture | 7.58 | MPa | ISO 37 |
| Flow : Fracture | 6.76 | MPa | ISO 37 |
| Tensile Elongation | ISO 37 | ||
| Transverse flow : Fracture | 690 | % | ISO 37 |
| Flow : Fracture | 540 | % | ISO 37 |
| Tear Strength | ISO 34-1 | ||
| Transverse flow | 26 | kN/m | ISO 34-1 |
| Flow | 28 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 20 | % | ISO 815 |
| 70°C, 22 hr | 36 | % | ISO 815 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 250 | Pa·s | ASTM D3835 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 171 - 193 | °C | |
| Cylinder Zone 2 Temp. | 177 - 199 | °C | |
| Cylinder Zone 3 Temp. | 182 - 204 | °C | |
| Cylinder Zone 5 Temp. | 188 - 204 | °C | |
| Die Temperature | 188 - 204 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RapidCast™ RC-210 | Innovative Polymers, Inc. | TSU | RapidCast™ |
| Bayfill® 382 (47.6:100) | Covestro - PUR | PUR-MDI | Bayfill® |
| LOTTMER HX-064AB | Lotte Chemical Corporation | TPE | LOTTMER |
| RTP 199 X 142299 B | RTP Company | PP, Unspecified | RTP |
| LUVOCOM® 20-0916 VP | LEHVOSS Group | PPA | LUVOCOM® |
