Order Products : sales@su-jiao.com
Acculam™ Melaglas G5/G9
| Category: | Mel Phenolic , Melamine Phenolic |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y0I5Ed_Acculam-Melaglas-G5-G9.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Melaglas G5/ G9 - Laminate sheet comprised of flame retardant melamine resin and a woven fiberglass glass substrate. It qualifies to NEMA G5/G9 and MIL-I-24768/1/8. This material has high strength and excellent arc resistance and electrical insulating properties which allows it to be used as mechanical support in electrical equipment, switchgear, and slot wedges where Class "B" insulation is required. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.90 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 0.70 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 262 | MPa | |
| 3.18 mm 2 | > 379 | MPa | |
| Compressive Strength 3 | 483 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 430 | J/m | |
| -- 5 | > 530 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 140 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| A | > 60000 | V | |
| D48/50 | > 55000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 770000 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity 6 | 7.00 | IEC 60250 | |
| Dissipation Factor | ASTM D150 | ||
| -- 7 | 0.018 | ||
| -- 8 | 0.017 | ||
| Arc Resistance | 180 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | A |
| 7 . | D24/23 |
| 8 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 TFE 13 SI 2 | RTP Company | Nylon 66 | RTP |
| TAISOX 8001 | Formosa Plastics Corporation | HDPE | TAISOX |
| I. Stern 745 | I. STERN & CO. INC. | ABS | I. Stern |
| Jackdaw PC DX20NT6458 | Jackdaw Polymers | PC | Jackdaw PC |
| NHU-PPS 21310C/F | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
