Order Products : sales@su-jiao.com
OLEFISTA™ QM4301D/QMC292
| Category: | Elastomer, Specialty , Specialty Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | OLEFISTA™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xkgKpl_OLEFISTA-QM4301D-QMC292.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OLEFISTA™QM4301D/QMC292 is a Specialty Elastomer material,. This product is available in the Asia-Pacific region,. OLEFISTA™The main features of QM4301D/QMC292 are:
|
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | JIS K7112 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 92 | JIS K7215 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 7.00 | MPa | JIS K7113 |
| Tensile Stress (Break) | 19.0 | MPa | JIS K7113 |
| Tensile Elongation (Break) | 780 | % | JIS K7113 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (180°C, 168 hr) | 88 | % | JIS K7113 |
| Change in Tensile Strain at Break in Air (180°C, 168 hr) | 93 | % | JIS K7113 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | JIS K6723 |
| Heat Deformation (120°C) | 10 | % | JIS K6723 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (30°C) | 9.0E+15 | ohms·cm | JIS K6723 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.00 mm) | V-0 | UL 94 | |
| Oxygen Index | 25 | % | JIS K7201 |
| Additional Information |
|---|
| Blend Ratio: QM4301D/QCM292, 100/3 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 140 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Adapter Temperature | 180 | °C | |
| Die Temperature | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® VE50C | BASF Leuna GmbH | Nylon 6 | Miramid® |
| Bayfit® 49BM02(80 Index, 71 kg/m³) | Covestro - PUR | PUR, Unspecified | Bayfit® |
| EPO-TEK® OE132-43 | Epoxy Technology Inc. | PI, TS | EPO-TEK® |
| Pebax® 7233 SP 01 | Arkema | PEBA-Ether | Pebax® |
| EPAMOULD 690A10 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
