Order Products : sales@su-jiao.com
CERTENE™ PBM-50
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xB6C5Z_CERTENE-PBM-50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-50 is a certified prime grade Impact copolymer designed for injection molding applications. PBM-50 offers high flow rate, good low temperature impact, and a high flexural modulus. PBM-50 applications include trays, thin walled parts, and housewares. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.901 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 91 | J/m | ASTM D256 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLON T 022 UV - transparent | POLYMA Kunststoff GmbH & Co. KG | PC | POLYLON |
| THERMOLAST® K TC9CSN (Series: CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| EMERGE™ PC 8430-10 | Trinseo | PC | EMERGE™ |
| OPTODYNE™ UV-1100 | DAIKIN AMERICA, INC. | Epoxy | OPTODYNE™ |
| Plenco 04504 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
