Order Products : sales@su-jiao.com
EMOPLEN® A 1104 T4
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | x8GoTu_EMOPLEN-A-1104-T4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %40 talcum filled |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 to 1.30 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 to 11 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.80 to 0.90 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3000 to 5000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 30.0 to 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 4.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 110 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 105 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXAMID™ 136F4Q32 | SAX Polymers | Nylon 6 | SAXAMID™ |
| ALTECH® PA66 A 2050/106 GF50 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| FLEXITEQ™ F60A111UV | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| Hyundai EP Adhesives MP300JA/7900 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| Okirol® E-5 | DIOKI d.d. | PS (EPS) | Okirol® |
