Order Products : sales@su-jiao.com

VICTREX® PEEK 450G

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICTREX® PEEK
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wDFXAZ_VICTREX-PEEK-450G.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour natural/beige.

Applications for higher strength and stiffness as well as high ductility. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.

General Information
Features	Semicrystallization Rigidity, high High strength Good disinfection Good liquidity Good chemical resistance Compliance of Food Exposure ductility
Uses	Non-specific food applications Medical/nursing supplies
Agency Ratings	FDA Food Exposure, Not Rated
Appearance	Beige Natural color
Forms	Particles
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Density			ISO 1183
-- ¹	1.26	g/cm³	ISO 1183
-- ²	1.30	g/cm³	ISO 1183
Spiral Flow	11.0	cm	Internal method
Molding Shrinkage ³			ISO 294-4
Vertical flow direction : 180°C	1.3	%	ISO 294-4
Flow direction : 180°C	1.0	%	ISO 294-4
Water Absorption			ISO 62
23°C, 24 hr, 3.20 mm	0.070	%	ISO 62
Equilibrium, 23°C, 50% RH	0.40	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 23°C)	85		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	3700	MPa	ISO 527-2
Tensile Stress (Yield, 23°C)	100	MPa	ISO 527-2
Tensile Strain (Break, 23°C)	45	%	ISO 527-2
Flexural Modulus (23°C)	4100	MPa	ISO 178
Flexural Stress			ISO 178
3.5% strain, 23°C	125	MPa	ISO 178
23°C ⁴	165	MPa	ISO 178
125°C	85.0	MPa	ISO 178
175°C	18.0	MPa	ISO 178
275°C	13.0	MPa	ISO 178
Compressive Stress			ISO 604
23°C	125	MPa	ISO 604
120°C	70.0	MPa	ISO 604

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	7.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break		ISO 179
Notched Izod Impact (23°C)	7.5	kJ/m²	ISO 180/A
Unnotched Izod Impact Strength (23°C)	No Break		ISO 180

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	152	°C	ISO 75-2/A
Glass Transition Temperature	143	°C	ISO 11357-2
Melting Temperature	343	°C	ISO 11357-3
Linear thermal expansion coefficient			ISO 11359-2
Flow : < 143°C	4.5E-5	cm/cm/°C	ISO 11359-2
Flow : > 143°C	1.2E-4	cm/cm/°C	ISO 11359-2
Lateral : < 143°C	5.5E-5	cm/cm/°C	ISO 11359-2
Lateral : > 143°C	1.4E-4	cm/cm/°C	ISO 11359-2
Specific Heat (23°C)	2200	J/kg/°C	DSC
Thermal Conductivity (23°C)	0.29	W/m/K	ISO 22007-4
RTI Elec	260	°C	UL 746
RTI Imp	180	°C	UL 746
RTI	240	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity			IEC 60093
23°C	1.0E+16	ohms·cm	IEC 60093
125°C	1.0E+15	ohms·cm	IEC 60093
225°C	1.0E+9	ohms·cm	IEC 60093
Dielectric Strength			IEC 60243-1
0.0500 mm	190	kV/mm	IEC 60243-1
2.00 mm	23	kV/mm	IEC 60243-1
Dielectric Constant			IEC 60250
23°C, 50 Hz	3.00		IEC 60250
23°C, 1 kHz	3.10		IEC 60250
200°C, 50 Hz	4.50		IEC 60250
Dissipation Factor (23°C, 1 MHz)	4.0E-3		IEC 60250
Comparative Tracking Index	150	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Glow Wire Flammability Index (2.00 mm)	960	°C	IEC 60695-2-12
Oxygen Index			ISO 4589-2
-- ⁵	24	%	ISO 4589-2
-- ⁶	35	%	ISO 4589-2
Toxicity			NES 713
CO Content	0.0740		NES 713
CO2 Content	0.150		NES 713
Total Gases	0.220		NES 713

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (400°C)	350	Pa·s	ISO 11443

Injection	Nominal Value	Unit
Drying Temperature	120 - 150	°C
Drying Time	3.0 - 5.0	hr
Hopper Temperature	< 100	°C
Rear Temperature	355	°C
Middle Temperature	360 - 365	°C
Front Temperature	370	°C
Nozzle Temperature	375	°C
Mold Temperature	170 - 200	°C

Injection instructions
Runner: Die / nozzle >3mm, manifold >3.5mmGate: >1mm or 0.5 x part thickness

Note Message
1 .	Amorphous
2 .	Crystalline
3 .	375°C nozzle,
4 .	at Yield
5 .	0.4 mm
6 .	3.2 mm

Resin Grade	Manufacturer	Category	Trademark
S.O.E.™ SS9000	AKelastomers	SBC	S.O.E.™
THERMOLAST® K TF8CGN (Series: FC)	KRAIBURG TPE	TPE	THERMOLAST® K
3M™ Dyneon™ PTFE Compound TF 3712	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound
ALCOM® ABS 530/29 SV31-753MCF	ALBIS PLASTIC GmbH	ABS	ALCOM® ABS
Wuxi Jiahong EB-102	Wuxi Jiahong Plastics Technology CO., Ltd.	PVC, Unspecified	Wuxi Jiahong