Order Products : sales@su-jiao.com
ICORENE® 1060 Enhanced Surface Finish
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v1RiVe_ICORENE-1060-Enhanced-Surface-Finish.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 1060 ESF (Enhanced surface Finish) is a polyethylene specifically developed for rotational moulding. ICORENE® 1060 ESF is a specialised grade designed to remove the surface pinholes during processing for applications such hygenic, medical, furniture and design applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.934 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 16.0 | MPa | ASTM D638 |
| Flexural Modulus | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 170 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN0720SN | Ginar Technology Co., LTD. | Nylon 6 | Mapex |
| Sindustris PC GN2302F | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Ebalta AH 100 / GL | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| ELITE™ AT 6202 | The Dow Chemical Company | EPE | ELITE™ |
| Lupoy® EF5001RFT | LG Chem Ltd. | PC+ABS | Lupoy® |
