Order Products : sales@su-jiao.com
GATONE™ 5630FC
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Solvay Specialities India Private Limited (SSIPL) |
| Trademark: | GATONE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rgOW76_GATONE-5630FC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GATONE™ 5630FC is a Polyetheretherketone (PEEK) material filled with 30% filler. It is available in Asia Pacific, Europe, or North America. Primary attribute of GATONE™ 5630FC: Flame Rated. Typical application of GATONE™ 5630FC: Wire & Cable |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.080 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, Injection Molded) | 12000 | MPa | ASTM D638 |
| Tensile Strength (23°C, Injection Molded) | 140 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 11100 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 50 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 315 | °C | ASTM D648 |
| Continuous Use Temperature | 260 | °C | ASTM D794 |
| Glass Transition Temperature | 148 | °C | DSC |
| CLTE - Flow | 2.1E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 | |
| Oxygen Index | 30 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PPH-40T Nat | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Sanren Y3700C (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| TEREZ PA 6.6 7510 GF 30 FL HY /4 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| DOMAMID® 66G25V0P 1003 A | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| LNP™ STAT-KON™ MD000 compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ STAT-KON™ |
