Order Products : sales@su-jiao.com
THERMOLAST® K TC6UVZ (Series: UV/AP)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ucuE2h_THERMOLAST-K-TC6UVZ-Series-UV-AP-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The UV/AP Series is your material solution for applications requiring high UV resistance. It is particularly suited for automotive exterior components. The compounds comply with GM standard GMW 16233. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 5.20 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 600 | % | ISO 37 |
| Tear Strength 3 | 20 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 21 | % | |
| 70°C, 24 hr | 52 | % | |
| 100°C, 24 hr | 72 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 25.0 to 40.0 | °C | |
| Injection Pressure | 20.0 to 100 | MPa | |
| Back Pressure | 2.00 to 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BCC Resins BC 8782 | BCC Products Inc. | TSU | BCC Resins |
| Detectaseal® XV7H | Precision Polymer Engineering Ltd. | Fluorelastomer | Detectaseal® |
| Epolene® N-35 | Westlake Chemical Corporation | LDPE | Epolene® |
| EPOXIDUR® EP 3585 | RASCHIG GmbH | Epoxy | EPOXIDUR® |
| MAJORIS ET261 - 7798 | AD majoris | PP, Unspecified | MAJORIS |
