Order Products : sales@su-jiao.com

TECHNO ABS 430

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	Techno Polymer Co, Ltd.
Trademark:	TECHNO ABS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uQWvow_TECHNOABS430.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Satisfying the requirement for exterior automobile parts: ductile in collision, soft like Polyolefin or Urethane

Better mold-ability and paint-ability than Polyolefin or Urethane

Fewer sink defects, warp defects, and painting defects than Polyolefin or Urethane for lower throughput cost

The best soft material for exterior automobile parts to meet the higher safety standard in the near future

General Information
Features	Sprayable Good formability Soft
Uses	Automotive exterior parts
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	27	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	104		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	45.0	MPa	ISO 527-2
Flexural Modulus	2000	MPa	ISO 178
Flexural Stress	64.0	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	31	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	79.0	°C	ISO 75-2/B

Resin Grade	Manufacturer	Category	Trademark
SEQUEL® 2405	LyondellBasell Industries	TPO (POE)	SEQUEL®
Trilliant™ HC HC6200-5002 XR Grey	PolyOne Corporation	Nylon 12	Trilliant™ HC
YUCLAIR® RG500U	SK Global Chemical	MDPE	YUCLAIR®
ADMER™ AT2138E	Mitsui Chemicals Europe GmbH	PE, Unspecified	ADMER™
ELASTOSIL® LR 3004/30 A/B	Wacker Chemie AG	Silicone	ELASTOSIL® LR