Order Products : sales@su-jiao.com
Andur M-80 AS/Curative
| Category: | PUR-MDI , Polyurethane (MDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uPzvKN_Andur-M-80-AS-Curative.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur M-80 AS is a custom formulated MDI based polyurethane elastomer system. It is designed as a low cost, easily processed candidate for use in dunnage applications. M-80 AS is a two component, 0.72:1 ratio (weight) system that can be processed at room temperature and yields an 80 Shore A elastomer. The system needs no post cure and contains no TDI. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 42.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 420 | % | ASTM D412 |
| Compression Set | 41 | % | ASTM D395 |
| Bayshore Resilience | 17 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity (21°C) | 700 | cP | ASTM D2393 |
| Additional Information |
|---|
| Die C Tear, ASTM D1004: 276 pliAverage Split Tear, ASTM D1938: 74 pliMixing Ratio: 0.72 to 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 43.3 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PA66 30 GF HB BLK | RTP Company | Nylon 66 | RTP |
| RTP 987 | RTP Company | PSU | RTP |
| 3M™ Dyneon™ PTFE Compound TF 6406 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| ALCUDIA® EBA PA-803 | REPSOL | EBA | ALCUDIA® EBA |
| Jamplast Inj-03 ABS | Jamplast, Inc. | ABS | Jamplast |
