Order Products : sales@su-jiao.com
Alathon® L5885
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u8CqgU_Alathon-L5885.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Applications: ALATHON L5885 is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements. Regulatory Status: L5885 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food. " Specific limitations or conditions of use may apply. Contact your Equistar sales representative for more information. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.85 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 51 | µm | |
| secant modulus | ASTM D882 | ||
| MD | 938 | MPa | ASTM D882 |
| TD | 1270 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 25.5 | MPa | ASTM D882 |
| TD : Yield | 26.2 | MPa | ASTM D882 |
| MD : Fracture | 54.5 | MPa | ASTM D882 |
| TD : Fracture | 23.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 700 | % | ASTM D882 |
| TD : Fracture | 750 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 30 | g | ASTM D1922 |
| TD | 900 | g | ASTM D1922 |
| Additional Information |
|---|
| The value listed as Secant Modulus MD/TD ASTM D882, was tested in accordance with ASTM E111. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 - 210 | °C |
| Extrusion instructions |
|---|
| Typical Extrusion Conditions:2.0 mil Blown FilmBlow-up Ratio: 2.5:1Die Gap: 60 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REXtac® APAO RT 1315 | Huntsman Corporation | PAO | REXtac® APAO |
| TITANZEX® HF7000 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANZEX® |
| Network Polymers PP PPB 25 0620 | Network Polymers, Inc. | PP Copolymer | Network Polymers PP |
| Epolene® E-43 | Westlake Chemical Corporation | PP, Unspecified | Epolene® |
| Petrothene® NA204000 (Injection) | LyondellBasell Industries | LDPE | Petrothene® |
