Order Products : sales@su-jiao.com
NYCOA Polyamide 2062
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E4he2L_NYCOA-Polyamide-2062.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 2062 is a Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it ideal for a variety of extrusion applications. In addition, the high relative viscosity provides excellent melt strength and toughness after process NYCOA 2062 complies with all the requirements of the FDA regulations 21 CFR 177.1500. NYCOA 2062 typical applications include barrier films and tubing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.7 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 72.4 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 200 | % | ASTM D638 |
| Flexural Modulus 3 | 2370 | MPa | ASTM D790 |
| Flexural Strength 4 | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 199 | °C | DSC |
| Additional Information |
|---|
| Relative Viscosity, NYCOA Method: 4 SAVWater Extractable, NYCOA Method: 0.8 %Tensile Elongation at Break, ASTM D638, 2 in/min: 200+%The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2902-80 Clear 8346 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ELASTEL™ CEANDER | HELLENIC CABLES S.A. | Rubber | ELASTEL™ |
| Geon™ 170 Series L100UF | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ 170 Series |
| ALTECH® PP-H A 4930/506 MR30 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Sylvin 5132-75 Clear Red 6234 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
