Order Products : sales@su-jiao.com
Mytex® AN206L-02
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u34d9d_Mytex-AN206L-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mytex® AN206L-02 is a Polypropylene product. It is available in North America. Typical application: Automotive. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 31 | g/10 min | Internal Method |
| Molding Shrinkage - Flow | 1.2E-3 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 21.0 | MPa | Internal Method |
| Tensile Elongation 2(Break) | 150 | % | Internal Method |
| Flexural Modulus 3 | 920 | MPa | Internal Method |
| Flexural Strength 4 | 26.0 | MPa | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | Internal Method | ||
| -30°C | 49 | J/m | |
| 23°C | 210 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 | °C | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| DuPont Impact Strength | Internal Method | ||
| -30°C | 17.0 | J | |
| 23°C | 24.0 | J |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 30 mm/min |
| 4 . | 30 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 300 No.18 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| TUFNYL® SGF 25 NATURAL | SRF Ltd. | Nylon 6 | TUFNYL® |
| Nylene® 200 P | Custom Resins Group | Nylon 6 | Nylene® |
| ALCUDIA® LDPE 2203FA | REPSOL | LDPE | ALCUDIA® LDPE |
| HiFill FR® PA6 FR-N | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
