Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion 87549
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EouvGE_Geon-Vinyl-Rigid-Extrusion-87549.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion 87549 is a rigid polyvinyl chloride product,. It can be processed by extrusion molding of profiles and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 16354 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2480 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 41.4 | MPa | ASTM D638 |
| Flexural Modulus | 2900 | MPa | ASTM D790 |
| Flexural Strength | 91.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 23°C, 3.18mm, injection molding | 1100 | J/m | ASTM D256A |
| Transverse flow : 23°C, 3.18mm, molded | 520 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 91 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 64.5 | J/cm | ASTM D4226 |
| 23°C 4 | 170 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 71.1 | °C | ASTM D648 |
| CLTE - Flow | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6226-83 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ADMER™ AT2717E | Mitsui Chemicals Europe GmbH | PP, Unspecified | ADMER™ |
| Lionpol IM-35066 | Lion Polymers Incorporated | TPE | Lionpol |
| Sylvin 6231-90 Blue 8465 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LUVOCOM® 94-8485 | LEHVOSS Group | LDPE | LUVOCOM® |
