Order Products : sales@su-jiao.com
Generic Phenolic - Wood Flour
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tv3wth_Generic-Phenolic---Wood-Flour.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Wood Flour This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 - 1.57 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.10 - 0.64 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 41.0 - 58.0 | MPa | ASTM D638 |
| Flexural Strength (23°C) | 68.1 - 95.6 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 152 - 216 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 2.1E+9 - 1.8E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 8.7 - 12 | kV/mm | ASTM D149 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 174 - 180 | °C | |
| Back Pressure | 0.300 - 1.00 | MPa | |
| Screw Speed | 40 - 60 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Wood FlourThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE CC3054 | Saudi Basic Industries Corporation (SABIC) | HDPE Copolymer | SABIC® HDPE |
| DOW™ HDPE 05962B | The Dow Chemical Company | HDPE | DOW™ HDPE |
| 4MID® 9B22130 I3 | 4Plas | Nylon 6 | 4MID® |
| Delta PCA 1103 | Delta Polymers | PC+ABS | Delta |
| LONGLITE庐 PET 9030-104 | CCP Group | PET | LONGLITE® PET |
