Order Products : sales@su-jiao.com
ResMart Plus ABS
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | ResMart |
| Trademark: | ResMart Plus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tu75xU_ResMart-Plus-ABS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High performance, High gloss, injection molding ABS |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 109 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 41.4 | MPa | ASTM D638 |
| Flexural Modulus | 2480 | MPa | ASTM D790 |
| Flexural Strength | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 83.9 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 40.6 - 79.4 | °C | |
| Injection Pressure | 68.9 - 96.5 | MPa |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polypropylene LGF 9621 | Trinseo | PP Homopolymer | Polypropylene |
| Flontech® FT-BRR40-8 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Electrafil® PC 04005 FR BK | Techmer Engineered Solutions | PC | Electrafil® |
| Plaslube® PA6/6 GF40 TL10 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Jam HM-8355(BL4) | Jam Petrochemical Company | HDPE | Jam |
