Order Products : sales@su-jiao.com

Tecnoflon® FOR 7353

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	o1ihXx_Tecnoflon-FOR-7353.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 7353 is a medium-low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 7353 is well suited for applications where excellent compression set and superior mold release are required. Some of the properties of Tecnoflon® FOR 7353 are: Very good scorch safety Good mold flow Excellent mold release Lack of mold fouling FDA compliant TECNOFLON® FOR 7353 can be used for compression and transfer moulding of O-rings, gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. Some FDA compliant compounds are reported in the table n° 2.

Message

TECNOFLON® FOR 7353 is a medium-low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 7353 is well suited for applications where excellent compression set and superior mold release are required.

Some of the properties of Tecnoflon® FOR 7353 are:

Very good scorch safety

Good mold flow

Excellent mold release

Lack of mold fouling

FDA compliant

TECNOFLON® FOR 7353 can be used for compression and transfer moulding of O-rings, gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some FDA compliant compounds are reported in the table n° 2.

General Information
Features	Copolymer Food Contact Acceptable Good Flow Good Mold Release Low Compression Set Medium-low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Agency Ratings	FDA 21 CFR 177.2600
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	39	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
SCHULABLEND® (ASA/PA) M/MW NC 100	A. Schulman Europe	ASA+Nylon	SCHULABLEND®
APEX® RM 8911	Teknor Apex Company	PVC, Rigid	APEX®
Fluoroloy® A01	Saint Gobain Performance Plastics	TP, Unspecified	Fluoroloy®
EPIMIX PBT GFR 30 NC	EPSAN Plastik SAN. ve TiC. A.S.	PBT	EPIMIX
KOPA® KN133HRF	Kolon Plastics, Inc.	Nylon 6	KOPA®