Order Products : sales@su-jiao.com

Mold Max® 40

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	Mold Max®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	to6SwO_Mold-Max-40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature. Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin). Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

Message

Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin).

Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

General Information
Uses	Modeling Material Prototyping
Appearance	Light Green
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D1475
Specific Volume	0.878	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	100A:10B by weight
Operating Temperature	-54 to 204	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.40	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	40		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	1.31	MPa	ASTM D412
Tensile Strength (Break)	3.79	MPa	ASTM D412
Tensile Elongation (Break)	250	%	ASTM D412
Tear Strength ¹	21.0	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life	45	min
Thermoset Mix Viscosity	45000	cP	ASTM D2393
Demold Time	1400	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
T-Blend® 4692C-PC	TSRC Corporation	TPE	T-Blend®
ALCUDIA® EVA PA-465	REPSOL	EVA	ALCUDIA® EVA
Edistir® N 2380	Versalis S.p.A.	PS (GPPS)	Edistir®
Elastollan® C 60 D	BASF Polyurethanes GmbH	TPU-Polyester	Elastollan®
Elastron® D D103.A60.N	Elastron USA, Inc.	SBS	Elastron® D