Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
Manufacturer: | S&E Specialty Polymers, LLC |
Trademark: | S&E Wire & Cable |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | tgVve4_S-E-Wire-Cable-GTPO-9100HF-Series.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
New generation 80/90C, UV Resistant, low gravity, flexible, polyolefin based Zero Halogen compound with good physical characteristics. |
General Information | |
---|---|
Features |
|
Uses |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
pH | 8.4 | IEC 60754-2 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Conductivity | 17.9 | µS/mm | IEC 60754-2 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength (Yield) | > 12.4 | MPa | ASTM D412 |
Tensile Elongation (Break) | 450 | % | ASTM D412 |
Aging | Nominal Value | Unit | Test Method |
---|---|---|---|
Change in Tensile Strength in Air (121°C, 168 hr) | -18 | % | UL 1581 |
Change in Ultimate Elongation in Air (121°C, 168 hr) | -22 | % | UL 1581 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Brittleness Temperature | < -16.0 | °C | ASTM D746 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity | 5.2E+14 | ohms·cm | ASTM D257 |
Dielectric Constant (23°C, 1 MHz) | 2.93 | ASTM D150 | |
Dissipation Factor (23°C, 1 MHz) | 5.9E-3 | ASTM D150 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 2583 | RTP Company | PC+ABS | RTP |
SCHULAMID® 66 GF 30 HR | A. Schulman Europe | Nylon 66 | SCHULAMID® |
SPESIN® KP212G30VFBL | Kolon Plastics, Inc. | PBT | SPESIN® |
Osterlene® LD-3-931 | Osterman & Company | LDPE | Osterlene® |
Plaslube® PEEK GF10 1001A | Techmer Engineered Solutions | PEEK | Plaslube® |