Order Products : sales@su-jiao.com

Tuftec™ M1943

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	AKelastomers
Trademark:	Tuftec™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8c03Ew_Tuftec-M1943.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Polymer with molecular chain bearing highly reactive functional groups, imparting high flowability and soft flexibility. High-quantity functional group content, enabling effective modification of engineering plastics and heightening of adhesion to metals and other plastics with small quantity of M1943 addition. It is supplied in pellet form. Applications: Modification of polyamides (PA), other engineering plastics, and olefinic resins, for high impact strength. Compatibilization with engineering plastics and olefinic resins. Flexible films component. Adhesives and sealants component.

Message

Polymer with molecular chain bearing highly reactive functional groups, imparting high flowability and soft flexibility. High-quantity functional group content, enabling effective modification of engineering plastics and heightening of adhesion to metals and other plastics with small quantity of M1943 addition. It is supplied in pellet form.

Applications:
Modification of polyamides (PA), other engineering plastics, and olefinic resins, for high impact strength. Compatibilization with engineering plastics and olefinic resins. Flexible films component. Adhesives and sealants component.

General Information
Features	Good Adhesion Good Flexibility Good Flow Good Impact Resistance High Reactivity Soft
Uses	Adhesives Film Plastics Modification Sealants
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ISO 1133
Acid Number - mg CH3ONa/g polymer	10.00		Internal Method

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	67		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	2.90	MPa	ISO 37
Tensile Stress ¹(Break)	11.0	MPa	ISO 37
Tensile Elongation ²(Break)	650	%	ISO 37

Note Message
1 .	Type 1A, 500 mm/min
2 .	Type 1A, 500 mm/min

Resin Grade	Manufacturer	Category	Trademark
TEREZ PA 6.6 7500 GF 30	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
Ultramid® A3WG10	BASF Corporation	Nylon 66	Ultramid®
Golden Compound PP S²PC 3545 BO	Golden Compound GmbH	PP, Unspecified	Golden Compound
Pujie CPE-135A	Zhanhua Pujie Chemical Technology Co.,Ltd	CPE	Pujie
OTECH TPO OTR7788 - Gasket	OTECH Corporation	TPE	OTECH TPO