Order Products : sales@su-jiao.com
Ferro PP NPP00GX08BK
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tD3Z4V_Ferro-PP-NPP00GX08BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ferro PP NPP00GX08BK is a polyolefin material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.8 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.2 | % | ASTM D955 |
| Transverse flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 77 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 21.4 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 300 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% secant : 23°C | 772 | MPa | ASTM D790 |
| Tangent : 23°C | 814 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 24.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 960 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 360 | J/m | ASTM D256 |
| Instrumented Dart Impact (-30°C) | 28.7 | J | ASTM D3763 |
| Dart Drop Impact | 32.5 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 73.9 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 46.1 | °C | ASTM D648 |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow | 1.1E-4 | cm/cm/°C | ASTM E831 |
| Lateral | 1.4E-4 | cm/cm/°C | ASTM E831 |
| Additional Information |
|---|
| Filler Content, ASTM D2584: 0.6%Shear Modulus, ASTM D4065, 23°C: 181 MPaFlammability, ISO 3795: 15 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PE GF/10 Natural 70 NA | PolyOne Corporation | HDPE | Maxxam™ |
| Stanyl® TS271P4 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Dutral® CO 038 PL | Versalis S.p.A. | EPDM | Dutral® |
| Elastron® V V201.A90.B | Elastron USA, Inc. | TPV | Elastron® V |
| LNP™ LUBRICOMP™ RAL22I compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
