Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic THV 500GX4Z

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VQarnc_3M-Dyneon-Fluoroplastic-THV-500GX4Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dyneon™ THV 500GX4 Z Fluorothermoplastic is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, and vinylidene fluoride in the form of pellets. It provides a balance of low temperature processing, low flammability, thermal stability, and melt processability. It can be used to prepare extruded films, tubes, profiles, and wire coatings. It is useful for applications that require flexibility, low temperature processing and good chemical resistance.

Message

Dyneon™ THV 500GX4 Z Fluorothermoplastic is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, and vinylidene fluoride in the form of pellets. It provides a balance of low temperature processing, low flammability, thermal stability, and melt processability. It can be used to prepare extruded films, tubes, profiles, and wire coatings. It is useful for applications that require flexibility, low temperature processing and good chemical resistance.

General Information
Features	Bondability Flame Retardant Good Chemical Resistance Good Flexibility Good Thermal Stability High Clarity
Uses	Coating Applications Film Profiles Tubing Wire & Cable Applications
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Film Extrusion Profile Extrusion Wire & Cable Extrusion

Physical	Nominal Value	Unit	Test Method
Density	2.00	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR)	4.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	28.0	MPa	ISO 527-1
Tensile Strain (Break)	480	%	ISO 527-1
Flexural Modulus	210	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	165	°C	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 75	%	ASTM D2863

Resin Grade	Manufacturer	Category	Trademark
Badaflex® TPE-S 60A 1000LD	Bada AG	TPE	Badaflex®
Chemraz SD585	Greene, Tweed & Co.	Perfluoroelastomer	Chemraz
Generic Nylon 66+Nylon 6I/6T	Generic	Nylon 66+Nylon 6I/6T	Generic
Sylvin 9604-90 Yellow 405	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Durethan® BKV 240 H2.0 XCP 901510	LANXESS GmbH	Nylon 6	Durethan®