Order Products : sales@su-jiao.com
Formolene® 4142N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rfgV8A_Formolene-4142N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Homopolymer For Injection Molded Applications Formolene® 4142N is a highly isotactic, polypropylene homopolymer with fast cycle time and easy mold release. It has use in injection molded applications including appliances, closures and thin wall programs. It contains a unique combination of stabilizers and additives, including nucleation and antistat which provides excellent processability and good end use performance. Formolene® 4142N meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1860 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 32 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP HI5303A | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Chemiton NA I2NA 50 | Franplast S.r.l. | SEBS | Chemiton |
| Durez® 33934 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| Ebalta AH 120 / TC 60 | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| INEOS HDPE J50-1000-178 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
