Order Products : sales@su-jiao.com
Pebax® 2533 SA 01
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rTtHgt_Pebax-2533-SA-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide Pebax® 2533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules (fragrances, oils, insecticides...). |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 24 hr, 4.00 mm | 0.80 | % | |
| Flow : 24 hr, 4.00 mm | 0.50 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 77 | ||
| Shore A, 15 sec | 74 | ||
| Shore D | 27 | ||
| Shore D, 15 sec | 22 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 32.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 750 | % | ISO 527-2 |
| Flexural Modulus | 12.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break | ||
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 58.0 | °C | ISO 306 |
| Melting Temperature | 134 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 55.0 to 65.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Processing (Melt) Temp | 180 to 240 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Note Message | |
|---|---|
| 1 . | Mold at 40°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SI301G40 | RJM International, Inc. | PET | RJM |
| EnCom PC-ABS 7000 | EnCom, Inc. | PC+ABS | EnCom |
| Plaskon SMT-B-1FX | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
| ROTOLENE® Natural | Polimeros Mexicanos S.A. de C.V. | LMDPE | ROTOLENE® |
| Alpha PVC 2222C-60 CLEAR | Mexichem Specialty Compounds Inc. | PVC, Flexible | Alpha PVC |
