Order Products : sales@su-jiao.com
ROTOLENE® Natural
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos S.A. de C.V. |
| Trademark: | ROTOLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mcyBIP_ROTOLENENatural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Linear Copolymer Medium Density Polyethylene for rotational molding. This resin is fully UV8 stabilized. Available as natural and several colors powder compounds. Applications: High quality Polyethylene recommended for general purpose applications. Frequently used for water tanks and small to medium size containers exhibiting very good mechanical properties. When used for inner layers, it provides excellent smooth finish and texture. Natural Resin, which is used as a carrier in color compounds meets all requirements of US food and drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 200 | hr | ASTM D1693 |
| 100% Igepal | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 18.6 | MPa | ASTM D638 |
| Fracture | 20.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 12 | % | ASTM D638 |
| Fracture | > 800 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 690 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (-40°C, 3.18 mm) | 67.8 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Mechanical properties determined on rotomolded plaque 1/8 in (3.175mm) |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom F5134T2-4 | Spartech Polycom | PP Homopolymer | Spartech |
| XANTAR® LDS 3724 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® LDS |
| ALCOM® POM 770/1 PTFE18 Si2 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALCOM® POM |
| ALTECH® PA66 A 2025/109 GF25 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| ULTEM™ 2210EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
