Order Products : sales@su-jiao.com
TEREZ PA/ABS Blend 3610/5
| Category: | Nylon 6+ABS , Polyamide 6 + ABS |
| Manufacturer: | TER HELL PLASTIC GMBH |
| Trademark: | TEREZ PA/ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qRGxdu_TEREZ-PA-ABS-Blend-3610-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Impact resistant PA/ABS Blend with requirements well flow characteristics For all kind of injection molding parts with increased low-temperature impact strength |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.08 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 38 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2200 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 38 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 150 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 62.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 120 | °C | ISO 306/B50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Ultra PC/ABS | ResMart | PC+ABS | ResMart Ultra |
| Cellidor B 500-05 | ALBIS PLASTIC GmbH | CAB | Cellidor |
| Eltex® Superstress™ CAP311 | INEOS Olefins & Polymers Europe | HDPE Copolymer | Eltex® |
| EPO-TEK® H74F | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Metocene MF650Y | LyondellBasell Industries | PP Homopolymer | Metocene |
