Order Products : sales@su-jiao.com
DAI-EL™ T-550
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ppUl1m_DAI-EL-T-550.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL Thermoplastic T-550 is a polymer consisting of fluororesin and fluoroelastomer. T-550 can be formed like a thermoplastic with properties similar to elastomer. T-550 has a good transparency and low extractable substances T-550 offers an excellent chemical resistance. T-550 demonstrates improved releasing properties compared with T-530. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.88 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 | Internal Method |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Coefficient of Friction | 0.50 | ||
| Taber Abrasion Resistance | |||
| 1000 Cycles, CS-17 Wheel | 2.00 | mg | |
| 1000 Cycles, H-22 Wheel | 14.0 | mg |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Yield) | 17.0 | MPa | |
| Tensile Elongation (Break) | 600 | % | |
| Tear Strength | 29.0 | kN/m | |
| Compression Set (50°C, 24 hr) | 13 | % | |
| Rebound Resilience | 10 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Gehman Torsion Test - T50 | -9 | °C | |
| Pyrolysis Initiation Temperature | 380 | °C |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 220 | °C | |
| Specific Heat | 1260 | J/kg/°C | |
| Thermal Conductivity | 0.15 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity | 6.0E+14 | ohms·cm | |
| Dielectric Strength | 14 | kV/mm | |
| Dielectric Constant (1 kHz) | 6.20 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 59 GB 20 | Plastcom | PP, Unspecified | SLOVALEN® |
| Cri-Line LC-612-LV | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Epoxies, Ect. 20-1710 | Epoxies, Etc. | Silicone Gel | Epoxies, Ect. |
| LNP™ LUBRICOMP™ RX05050 compound | SABIC Innovative Plastics Europe | Nylon 66 | LNP™ LUBRICOMP™ |
| LUVOCOM® 1105-8673/GY | LEHVOSS Group | PEEK | LUVOCOM® |
