Order Products : sales@su-jiao.com
FireCon™ CPE 30-2 RoHS BLACK
| Category: | CPE , Chlorinated Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | FireCon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | naNUHL_FireCon-CPE-30-2-RoHS-BLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The filled flexible thermoplastic CPE sheath compound material is a good choice for low-voltage power and cable control cables. Wire and cable manufacturers can use products for thermoplastic extrusion processing without investing in continuous vulcanization (CV) equipment. CPE 30-2 has excellent limiting oxygen index performance and good ductility at lower operating temperatures. Good moisture resistance, oil resistance and electrical characteristics. |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Appearance | Particles/cubes | ASTM D2090 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 35 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 6.89 | MPa | ASTM D638 |
| Tensile Strength 2(Break) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 350 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -35.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (1.91 mm) | 32 | % | ASTM D2863 |
| Additional Information |
|---|
| 注释：推荐的预干燥为在175°-185°F环境下4小时。注释：根据螺旋设计不同，典型加工温度处于320° - 390°F之间。请联系技术服务部，获取特定设备的推荐。注释：模制厚板的典型属性（0.075"）；不能视为技术规格。 |
| Note Message | |
|---|---|
| 1 . | Type 4, 510mm/min |
| 2 . | Type 4, 510mm/min |
| 3 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime 4070 | Prime PVC® | PVC, Rigid | Prime |
| SHIN-A SER-650 | SHIN-A T&C | Epoxy | SHIN-A |
| Sindustris PP GP2201 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Plenco 01506 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
| Elastocon® 9050 | Elastocon TPE Technologies | TPE | Elastocon® |
