Order Products : sales@su-jiao.com
RTP 2800 B-55A HF
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | na91az_RTP-2800-B-55A-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Flow |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.990 | g/cm³ | ASTM D792 |
| Moisture Content | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 1.83 | MPa | ASTM D412 |
| Tensile Strength 2(Yield, 3.20 mm) | 4.14 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 450 | % | ASTM D412 |
| Tear Strength 4 | 19.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 182 to 210 | °C | |
| Mold Temperature | 15.6 to 65.6 | °C | |
| Injection Pressure | 82.7 to 124 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C, 510 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 7795 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| THERMOLAST® M TM3RST (Series: MC/RS) | KRAIBURG TPE | TPE | THERMOLAST® M |
| TRIPET® 2500G20 | Samyang Corporation | PET | TRIPET® |
| HiFill® PA4/6 GF50 HS BK | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Plaslube® PA6/6 GF13 ML2 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
