Order Products : sales@su-jiao.com
RELENE® M24300
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n7y1BP_RELENE-M24300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M24300 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers good fluidity and excellent processability, and is mainly recommended for preparing masterbatch. It can be also used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 10.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 700 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 325 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO P10 TL | Arkema | Nylon 11 | Rilsan® |
| Badamid® PA610 GF30 TF15 | Bada AG | Nylon 610 | Badamid® |
| Lapex R | LATI S.p.A. | PPSU | Lapex |
| Pibiter® NRV30 NAT001 | SO.F.TER. SPA | PBT | Pibiter® |
| OTECH CPE OTE8541 - Cable Jacket | OTECH Corporation | CPE | OTECH CPE |
