Order Products : sales@su-jiao.com
TEKNIFLEX® PGOA 25400
| Category: | Film, PETG/PCTFE , PETG/PCTFE Film |
| Manufacturer: | Tekni-Films, a div of Tekni-Plex |
| Trademark: | TEKNIFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mg13aV_TEKNIFLEX-PGOA-25400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekniflex PGA and PGOA series are designed for the packaging of Medical Device/Drug Product Combinations requiring high moisture and/or oxygen barrier. Thermoformable, FDA-compliant, Medical-Grade PETG/PCTFE film lamination, which can be sterilized by radiation. Tekni-Plex offers a wide range of PETG-based film structures to meet both performance and cost requirements. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | |
| Dimensional Stability 1(140°C) | -4.0 to 4.0 | % |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Film Thickness 2 | 807 | µm | |
| Yield | 1.13 | m²/kg |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Roll Width 3 | < 110.00 | cm | |
| Thermoforming Molding Temperature | 100 to 160 | °C |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength - MD (Yield) | 45.0 | MPa | |
| Oxygen Transmission Rate (23°C, 100% RH) | 0.42 | cm³/m²/24 hr | |
| Water Vapor Transmission Rate (38°C, 90% RH) | 0.056 | g/m²/24 hr |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Haze | 4.0 | % |
| Note Message | |
|---|---|
| 1 . | 30 minutes |
| 2 . | Thickness tolerance: ±10% |
| 3 . | Roll width tolerance: ±1.5 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-97-T0207A-110 | Teknor Apex Company | TPE | Telcar® |
| Alathon® M5370 | LyondellBasell Industries | HDPE Copolymer | Alathon® |
| DENKA POVAL K-17E | Denka Company Limited | PVOH | DENKA POVAL |
| GERMAMID 6 HZ 4 | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| Hostacom X G3 U12 | LyondellBasell Industries | PP Copolymer | Hostacom |
