DOW™ LDPE 5004I Datasheet,LDPE,The Dow Chemical Company-SHANGHAI SUSHENG

Message
Dow LDPE 5004I is used for fresh milk cartons, liquid/juice containers, dry foods packaging, snack foods packaging, moist foods packaging, and medical packaging. Dow LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. A low melt index coating resin for demanding packaging applications Complies with: U.S. FDA 21 CFR 177.1520 (c) 2.2 U.S. FDA -DMF Canadian HPFB No Objection (With Limitations) EU, No 10/2011 Japan Hygienic Olefin and Styrene Plastics Association Consult the regulations for complete details.

General Information
Agency Ratings	DMF not rated FDA 21 CFR 177.1520(c) 2.2 HPFB (Canada) No Objection 2 JHOSPA not rated Europe No 10/2011
Forms	Particle
Processing Method	Extrusion coating cast film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.924	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.2	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction ¹(with self-dynamic, extrusion coating)	0.45		ASTM D1894

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Film Puncture Resistance (25 µm)	2.32	J/cm³	Internal method
Film strength			ASTM D882
MD : 25 µm, cast film	114	J/cm³	ASTM D882
TD : 25 µm, cast film	145	J/cm³	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 25 µm, extruded film	14.8	MPa	ASTM D882
TD : Yield, 25 µm, extruded film	10.9	MPa	ASTM D882
MD : Broken, 25 µm, extruded film	31.0	MPa	ASTM D882
TD : Broken, 25 µm, extruded film	17.0	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Broken, 25 µm, extruded film	220	%	ASTM D882
TD : Broken, 25 µm, extruded film	610	%	ASTM D882
Dart Drop Impact (25 µm, Cast Film)	27	g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD : 25 µm, cast film	310	g	ASTM D1922
TD : 25 µm, cast film	80	g	ASTM D1922
Seal Initiation Temperature ²(25 µm, Extrusion Coating)	105	°C
Water Vapor Transmission Rate ³(25 µm, Extrusion Coating)	0.59	g·mm/m²/atm/24 hr	ASTM F1249

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	95.0	°C	ASTM D1525
Melting Temperature (DSC)	112	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss (45, 25.4 µm, cast film)	51		ASTM D2457
Haze (25.4 µm, Cast Film)	13	%	ASTM D1003

Extrusion	Nominal Value	Unit	Test Method
Melt Temperature	316 - 327	°C
Neck-in (321°C, 25.4 µm)	63.5	mm	Internal method
Maximum production line speed	7.6	m/sec	Internal method
Minimum coating thickness	7.6	µm	Internal method
Minimum coating weight	7.2	g/m²	Internal method

Extrusion instructions
铸造薄膜的制造条件：螺杆 A，尺寸：2 英寸 (51 mm)；30:1 L/D 熔体温度：502°F (261°C) 螺杆速度：33 rpm 螺杆 B，尺寸：2.5 英寸 (63.5 mm); 30:1 L/D 熔体温度：501°F (261°C) 螺杆速度：33 rpm 螺杆 C，尺寸：2.5 英寸 (63.5 mm)；30:1 L/D 熔体温度：499°F (259°C) 螺杆速度：33 rpm 螺杆 D，尺寸：2.5 英寸 (63.5 mm)；30:1 L/D 熔体温度：500°F (260°C) 螺杆速度：33 rpm 螺杆 E，尺寸：2 英寸 (51 mm)；30:1 L/D 熔体温度：501°F (261°C) 螺杆速度：33 rpm 螺杆类型：DSB II 冷却辊温度：70°F (21°C) 生产线速度：400 fpm（123 米/分）挤出涂层薄膜的制造条件：螺杆尺寸：3.5 英寸 (89 mm) 30:1 L/D 螺杆类型：带 Maddock Mixer 的单跨型模具间隙：20 密尔 (0.508 mm) 熔体温度：625°F (329°C) 输出：250 磅/小时螺杆速度：90 rpm 厚度：1.0 密尔 (25 µm)

Extrusion instructions

铸造薄膜的制造条件：螺杆 A，尺寸：2 英寸 (51 mm)；30:1 L/D 熔体温度：502°F (261°C) 螺杆速度：33 rpm 螺杆 B，尺寸：2.5 英寸 (63.5 mm); 30:1 L/D 熔体温度：501°F (261°C) 螺杆速度：33 rpm 螺杆 C，尺寸：2.5 英寸 (63.5 mm)；30:1 L/D 熔体温度：499°F (259°C) 螺杆速度：33 rpm 螺杆 D，尺寸：2.5 英寸 (63.5 mm)；30:1 L/D 熔体温度：500°F (260°C) 螺杆速度：33 rpm 螺杆 E，尺寸：2 英寸 (51 mm)；30:1 L/D 熔体温度：501°F (261°C) 螺杆速度：33 rpm 螺杆类型：DSB II 冷却辊温度：70°F (21°C) 生产线速度：400 fpm（123 米/分）挤出涂层薄膜的制造条件：螺杆尺寸：3.5 英寸 (89 mm) 30:1 L/D 螺杆类型：带 Maddock Mixer 的单跨型模具间隙：20 密尔 (0.508 mm) 熔体温度：625°F (329°C) 输出：250 磅/小时螺杆速度：90 rpm 厚度：1.0 密尔 (25 µm)

Note Message
1 .	1.0 Mill (25 µm) coating applied to 50 pounds of kraft paper.
2 .	Apply the coating to 50 pounds of kraft paper.
3 .	Apply the coating to 50 pounds of kraft paper.

Category:	LDPE , Low Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kvMdtW_DOW-LDPE-5004I.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Shandong PP PMF4201	Shandong Dongchen Engineering Plastics Co., Ltd.	PP, Unspecified	Shandong PP
Tectron H2295	TECTRON Systems Pte Ltd	TPV	Tectron
ADENE NHJAGD	A.D. Compound spa	PP Copolymer	ADENE
Andur 85 APLF/Curene® 442	Anderson Development Company	PUR-Ether/TDI	Andur
Sylvin 9995-68 Red 6309	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin