Order Products : sales@su-jiao.com

PrimoFlo 70A-300

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	KMI Group Inc.
Trademark:	PrimoFlo
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kZFxCn_PrimoFlo-70A-300.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

PrimoFlo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

PrimoFlo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts.

PrimoFlo products can be molded or extruded using standard thermoplastic equipment.

PrimoFlo products are non--hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers.

PrimoFlo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties.

PrimoFlo products are an ideal choice for single component molded parts as well as over--molding applications. It is fully bondable to polypropylene.

PrimoFlo products are a drop in when SEBS or SBS compounds are used.

In brief

Excellent abrasion and tear resistance

Soft touch feel

Slip resistance

Fully weatherable

Does not need to be dried before use

Easily colorable

Fully recyclable

Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

General Information
Features	Bondability Good Abrasion Resistance Good Colorability Good Tear Strength Good Weather Resistance High Tensile Strength Moisture Resistant Recyclable Material Soft
Uses	Bonding Overmolding
Appearance	White
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.910	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	70		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	9.34	MPa	ASTM D412
Tensile Elongation (Break)	> 500	%	ASTM D412

Injection	Nominal Value	Unit
Suggested Max Regrind	40	%

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KE-941U	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
TECHNYL® A 31T1 MZ40 GREY 174 N	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
CALP WW672	Lion Idemitsu Composites Co., Ltd.	Polyolefin, Unspecified	CALP
INSTRUC PPGF40CC	Infinity LTL Engineered Compounds	PP, Unspecified	INSTRUC
Plaslube® PA6/6 CF33 ML2 BK	Techmer Engineered Solutions	Nylon 66	Plaslube®