Order Products : sales@su-jiao.com
apinat® HMB
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fGMYVW_apinat-HMB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®HMB is a biodegradable polymer (Biodeg Polymers) product,. It is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 - 1.23 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 65 | ASTM D2240 | |
| Shaw D | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.10 - 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 360 - 680 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 33.0 - 80.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 80.0 - 120 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8200-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TECAST™ 6PA | Ensinger Inc. | Nylon 6 | TECAST™ |
| Expandable PS D833B | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
| Keltan® 4577 | LANXESS Buna GmbH | EPDM | Keltan® |
| K-Bin Rigid PVC KB-5019 | K-Bin, Inc. | PVC, Unspecified | K-Bin Rigid PVC |
