Order Products : sales@su-jiao.com
Pro PP-HO-30T
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Pro Polymers |
| Trademark: | Pro-Comp™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k7wEtl_Pro-PP-HO-30T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP-HO-30T is a 30% Talc Filled, Polypropylene Homopolymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18mm | 1.0 | % | ASTM D955 |
| Transverse flow : 3.18mm | 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.0 | MPa | ASTM D638 |
| Flexural Modulus | 2890 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m | ASTM D256 |
| Dart Drop Impact | 0.800 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 126 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 72.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Melt Flow Rate, ASTM D1238, 230°C/2.1kgf: 8 to 12 g/10 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil R-1009 | NuSil Technology | Silicone | NuSil |
| 4MID® 9A23500 | 4Plas | Nylon 66 | 4MID® |
| ALCOM® PC 740/4 UV GY1152-09LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| JSR EPR EP941P | JSR Corporation | EPDM | JSR EPR |
| Pibiter® HI C3311 NERO900 | SO.F.TER. SPA | PBT | Pibiter® HI |
