AZDEL™ U421-B01 (Transverse)

Category:	PP Alloy , Polypropylene Alloy
Manufacturer:	Azdel, Inc.
Trademark:	AZDEL™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ilGXki_AZDEL-U421-B01-Transverse-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AZDEL™U421-B01 (Transverse) is a polypropylene alloy (PP alloy) material,. This product is available in North America,.

General Information
Appearance	Black
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.10 - 0.30	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	5310	MPa	ISO 527-2
Tensile Stress (Yield)	60.0	MPa	ISO 527-2
Tensile Strain (Break)	2.3	%	ISO 527-2
Flexural Modulus	4800	MPa	ISO 178
Flexural Stress	145	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	143	°C	ASTM D648

Flammability	Nominal Value	Unit	Test Method
Burning Rate	4.6	mm/min	ISO 3795

Additional Information
Filler Content by Weight, Internal Test Method, Ashing: 42%Sheet Thickness, Internal Test Method: 3.9 mmBasis Weight, Internal Test Method, Mass per unit area: 4.7 kg/m²Multi-axial Impact, ASTM D3763 Test Method, 4mm, Max Load: 700kgSpecific Gravity, ASTM D792 Test Method, Laminate: 1.21 sp gr 23/23°CSpecific Gravity, ASTM D792 Test Method, Molded: 1.21 sp gr 23/23°CCoefficient of Thermal Expansion, ASTM E831 Test Method, -40 to 120°C ( -40 to 250°F): 37 ppm/°CNotched Izod Impact Strength, ISO 180 Test Method, 23°C, 4.0mm: 720 J/mPoission's Ratio, ISO 527 Test Method: 0.361

Additional Information

Filler Content by Weight, Internal Test Method, Ashing: 42%Sheet Thickness, Internal Test Method: 3.9 mmBasis Weight, Internal Test Method, Mass per unit area: 4.7 kg/m²Multi-axial Impact, ASTM D3763 Test Method, 4mm, Max Load: 700kgSpecific Gravity, ASTM D792 Test Method, Laminate: 1.21 sp gr 23/23°CSpecific Gravity, ASTM D792 Test Method, Molded: 1.21 sp gr 23/23°CCoefficient of Thermal Expansion, ASTM E831 Test Method, -40 to 120°C ( -40 to 250°F): 37 ppm/°CNotched Izod Impact Strength, ISO 180 Test Method, 23°C, 4.0mm: 720 J/mPoission's Ratio, ISO 527 Test Method: 0.361

Resin Grade	Manufacturer	Category	Trademark
Matrixx 80S7351	The Matrixx Group, Inc.	PET	Matrixx
Spartech Polycom X03831	Spartech Polycom	PP Homopolymer	Spartech
Unichem 6000	Colorite Polymers	PVC, Unspecified	Unichem
Honeywell Halar E1000	Honeywell	PCTFE	Honeywell Halar
KYOCERA CT4112	KYOCERA Chemical Corporation	PI, TS	KYOCERA