Order Products : sales@su-jiao.com
Menzolit® SMC 0310
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Menzolit Ltd (UK) |
| Trademark: | Menzolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hiisGS_Menzolit-SMC-0310.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Menzolit® SMC 0310 is a low shrink standard SMC providing improved surface quality, reduced shrinkage and warpage. Typical fields of applications are mechanical engineering and electrical industry, where improved dimensional stability and better surface p |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.80 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.050 | % | ISO 294-4 |
| Water Absorption (Saturation, 23°C) | 0.50 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 12000 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Compression Molded) | 75.0 | MPa | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 10000 | MPa | ISO 178 |
| Flexural Stress (Compression Molded) | 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Compression Molded) | 80 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 130 | °C | DSC |
| CLTE - Flow | 1.2E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 | |
| Glow Wire Ignition Temperature | 750 | °C | IEC 60695-2-13 |
| Oxygen Index | 22 | % | ISO 4589-2 |
| Additional Information |
|---|
| Shrinkage, ISO 2577: 0.05%Post Moulding Shrinkage, DIN 53464: 0%Heat Distortion Temperature, EN ISO 75-2: >200°CContinuous Service Temperature, Menzolit Method: 140°CGlow Bar, IEC 60707-3: BH2 <= 95 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 135 - 150 | °C | |
| Injection Pressure | 8.00 - 10.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3670 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Tarnamid® T-27 GF 30I | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Sylvin 9663-70 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Geon™ BIO HC5165G | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| Huafon HF-3492A | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
