Tecnoflon® FOR 9383

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hLrWpP_Tecnoflon-FOR-9383.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 9383 is a medium-high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 9383 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers and in any application requiring adhesion to metal. Tecnoflon® FOR 9383 contains proprietary cure system providing superior processability for fast cycles and scorch safety. Some of the basic properties of TECNOFLON® FOR 9383 are: Very good processability Excellent chemical resistance Good hot tear resistance Good heat resistance Good bonding to metal Very good scorch safety Tecnoflon® FOR 9383 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR 9383 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 9383 is a medium-high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 9383 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers and in any application requiring adhesion to metal. Tecnoflon® FOR 9383 contains proprietary cure system providing superior processability for fast cycles and scorch safety.

Some of the basic properties of TECNOFLON® FOR 9383 are:

Very good processability

Excellent chemical resistance

Good hot tear resistance

Good heat resistance

Good bonding to metal

Very good scorch safety

Tecnoflon® FOR 9383 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance.
This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
Tecnoflon® FOR 9383 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Additive	Processing Aid
Features	Bondability Fast Molding Cycle Good Adhesion Good Chemical Resistance Good Heat Aging Resistance Good Processability Good Tear Strength High Heat Resistance Medium-high Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	60	MU
Fluorine Content ²	69	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
NuSil CV2-2644	NuSil Technology	Silicone	NuSil
ALCOM® PA66 910/1.1 CF30 PTFE15	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
Elastron® G G100.A40.N	Elastron USA, Inc.	SEBS	Elastron® G
Huafon JF-S-M8090	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
PLUSTEK PA303G43	Polyram Ram-On Industries	Nylon 66	PLUSTEK