Order Products : sales@su-jiao.com

NuSil CV2-2644

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	e8PCuG_NuSil-CV2-2644.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.004 ohm-cm

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.004 ohm-cm

General Information
Features	Electrically Conductive Low to No Outgassing
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Tan
Density	3.03	g/cm³
Curing Time (150°C)	0.50	hr
Pot Life	150	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	85
Tensile Strength	3.45	MPa
Tensile Elongation at Break	100	%

Resin Grade	Manufacturer	Category	Trademark
SPESIN® KP212G15V0BL	Kolon Plastics, Inc.	PBT	SPESIN®
BCC Resins BC 8160	BCC Products Inc.	PUR, Unspecified	BCC Resins
Borealis PE MG9641B	Borealis AG	HDPE	Borealis PE
Braskem PP H362-09RS	Braskem Europe GmbH	PP Homopolymer	Braskem PP
Hypro® PPH-GF20 NATURAL	Entec Polymers	PP Homopolymer	Hypro®