Order Products : sales@su-jiao.com
Lifoflex® UV FLAM 50700-2 Anti
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Müller Kunststoffe GmbH |
| Trademark: | Lifoflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gs6MbO_LifoflexUVFLAM507002Anti.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Base Material: TPS - SEBS Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183/A |
| Molding Shrinkage | 0.75 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 47 - 53 | ISO 868 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistance 1 | ohms |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.5 mm | V-0 | UL 94 | |
| 3.0 mm | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70 - 80 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 180 - 240 | °C | |
| Middle Temperature | 180 - 240 | °C | |
| Front Temperature | 180 - 240 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Note Message | |
|---|---|
| 1 . | DIN EN 61340-2-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® BGK 30 Natural | Radici Plastics | Nylon 6 | Radilon® |
| Stanyl® TW341-B | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Andur 2-60 DP | Anderson Development Company | PUR-Ether/TDI | Andur |
| Clariant Nylon 6 6253-L | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| SQUARE® LIM3600-40A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
